Posts: 1,389
Threads: 90
Joined: Aug 2007
Kouznetsov Wrote:Quote:Quote:I have plotted the only one, such that .
At , for example,
;
.
This contradicts ? No. approaches the limiting values at any real . (in spite the cutlines!)
Oh that was my mistake, I thought you are speaking about the limits for imaginary infinity.
Quote:I tried to post the code as "source" together with the picture, but it was not accepted...
Ya, give me the extension of the file so I can add it to the accepted file types. Otherwise you just can append a .txt to the end of the filename, then its accepted if not too big. Suffix .gz also always works up to 1MB.
Quote:I know that usually the "selfmade" codes dislike to run at another computer, so, let us do it with few steps, reproducing the figures one by one. Let us begin with very simple code. Please, reproduce first Figure 1 from the source posted at http://en.citizendium.org/wiki/Image:Exa...nLog01.png
please, tell me how does it run at your computer and send me (or post) the resulting picture. It is supposed to be <b>identical</b> with the eps file I got at my computer.
Gosh, you are really doing that in C! Creating eps in C, its unbelievable. But yes the code compiles with lm and produce the same (at least visually) image.
Quote:Yes, but they seem to be singular.. What example would you suggest to begin with?
I would begin with what I am best with: tetration by regular iteration.
Quote:"Equal to mine" is tetration that has no singularities at the right hand side of the complex halfplane.
But only if your uniqueness conjecture is correct.
Ok this demand can reduced to having no singularities in the strip of .
Quote: I did not see any map of real and imaginary parts, nor those of modulus and phase. Tell me if I am wrong.
Hm, indeed I think we have only real plots available, as I am not familiar with complex function visualization. However most tetrations considered here are given as a powerseries developed at 0. So its not so easy to continue them to the whole strip . However for the regular tetration I have an iterative formula so this should be possible to make a plot similar to yours. And as I already explained, it is periodic along the imaginary axis, hence has no limit at . Does that mean that it is different to your's? Which value does your assume at ? Is it the nearest complex fixed point of ?
Posts: 151
Threads: 9
Joined: Apr 2008
bo198214 Wrote:...
I would begin with what I am best with: tetration by regular iteration. It does not click.. May be I find it later..
Quote:Quote:"Equal to mine" is tetration that has no singularities at the right hand side of the complex halfplane.
But only if your uniqueness conjecture is correct.
Ok this demand can reduced to having no singularities in the strip of .
You are right, the strip is enough.
Quote:Hm, indeed I think we have only real plots available, as I am not familiar with complex function visualization.
If we work together, soon you will be.
Quote:However most tetrations considered here are given as a powerseries developed at 0.
So its not so easy to continue them to the whole strip .
However for the regular tetration I have an iterative formula so this should be possible to make a plot similar to yours.
Go ahead! I hope you can reproduce the period.
Quote:And as I already explained, it is periodic along the imaginary axis, hence has no limit at . Does that mean that it is different to your's?
No, that does not. The analytic tetrations should coincide. Does your soluiton show period
?
Quote:Which value does your assume at ?
Is it the nearest complex fixed point of ?
The previous code fails at , because it needs such a value.
I made another code for ; it does not assume the limiting value.
But it knows the asymptotic.
Well, I see, you are ready for figure 2. I am cleaning up the code. While, you can read the description I have posted. Do you already have writing access at citizendium?
For other users who watch only the last post, I repeat the url:
en.citizendium.org/wiki/User mitrii_Kouznetsov/Analytic_Tetration
P.S. At the preview, part of url appears as "smile"; should be
U s e r : D m i t r i i _ K o u z n e t s o v without spaces
Posts: 1,389
Threads: 90
Joined: Aug 2007
05/23/2008, 03:47 PM
(This post was last modified: 11/20/2008, 09:28 AM by bo198214.)
Kouznetsov Wrote:bo198214 Wrote:...
I would begin with what I am best with: tetration by regular iteration. It does not click.. May be I find it later..
Regular iteration is definitely something you have to learn about.
The usual starting article for doing so is
G. Szekeres, Regular iterations of real and complex functions. Acta Math. 100 (195 , 203258
However I think it is written somewhat cumbersome.
If you speak French I advice you to read
Jean Écalle, Théorie des invariants holomorphes, Publ. Math. Orsay No. 67–7409
Lars Kinderman has a very good collection of literature for the topic.
Quote:Quote:And as I already explained, it is periodic along the imaginary axis, hence has no limit at . Does that mean that it is different to your's?
No, that does not. The analytic tetrations should coincide. Does your soluiton show period
?
Hm, not exactly, what I derived some posts earlier would give merely , yours is .
Btw. there are infinitely many analytic functions that have no singularity on right halfplane: If has no singularity there, also , , is a superexponential with no singularities on the right halfplane and any 1periodic function with in would do.
More interesting seems here the boundedness on the strip , which seems to be an universal uniqueness criterion.
Quote:I made another code for ; it does not assume the limiting value.
But it knows the asymptotic.
ah, ok.
Quote:Do you already have writing access at citizendium?
Hm, I signed up but did not get any response yet ...
Quote:For other users who watch only the last post, I repeat the url:
en.citizendium.org/wiki/Usermitrii_Kouznetsov/Analytic_Tetration
P.S. At the preview, part of url appears as "smile"; should be
U s e r : D m i t r i i _ K o u z n e t s o v without spaces
You can include clickable urls into your post with the construction:
Code: [url=http://....]how the link appears[/url]
Posts: 151
Threads: 9
Joined: Apr 2008
Posts: 1,389
Threads: 90
Joined: Aug 2007
Kouznetsov Wrote:Bo, namely for my expression can be simplified to yours.
Yes you are right, again stupid mistake of mine. For the fixed point is and the period is .
Good, so seems quite as if tetration by regular iteration gives the same as tetration with your approach.
As it is too expensive to compute the contours, I give here pictures of the regular tetration as 3d plot, absolute value over the complex plane, here it is:
over 1I*10 ... +1+I*10
over 0 ... 1+I*20
One can clearly see the period of 17.14 along the imaginary axis.
Quote:Quote:Btw. there are infinitely many analytic functions that have no singularity on right halfplane: If has no singularity there, also , , is a superexponential with no singularities on the right halfplane and any 1periodic function with in would do.
I disagree. At some smooth contour in your strip, the contour enters the left halfplane and crosses the cut . You have no need to evaluate any tetration in order to see it. Corresponding contour is not continuous.
You are right. As sin is not bounded in the real part on the strip it can go to arbitrary negative values.
Quote:Fig.2 is ready at
http://en.citizendium.org/wiki/Tetration...rameters00. Try to run it.
ok, that works too (but as a c++ program, which I wasnt aware of).
Posts: 151
Threads: 9
Joined: Apr 2008
Quote:As it is too expensive to compute the contours,
...
One can clearly see the period of 17.14 along the imaginary axis.
How long does it take, to plot ?
Posts: 151
Threads: 9
Joined: Apr 2008
05/24/2008, 05:36 AM
(This post was last modified: 05/24/2008, 06:29 AM by Kouznetsov.)
Henryk, I hope you agree with Figure 2. Let us move to Figure 3. Please, run testfile of the fast plotter; tell me if the code for figure http://en.citizendium.org/wiki/Image:Con...xample.jpg runs well at your computer. You will need functions ado and conto for Figure 3.
If it works, try fig.3 http://en.citizendium.org/wiki/AnalyticT...seSqrt2v00.
Posts: 1,389
Threads: 90
Joined: Aug 2007
05/24/2008, 09:43 AM
(This post was last modified: 05/24/2008, 09:44 AM by bo198214.)
Kouznetsov Wrote:Quote:As it is too expensive to compute the contours,
...
One can clearly see the period of 17.14 along the imaginary axis.
How long does it take, to plot ?
This is not in scale and took 1562 seconds. You see the difference is in the range of error. But I mean it was already the theoretic result, that it is periodic with so no need to wonder.
Posts: 1,389
Threads: 90
Joined: Aug 2007
Kouznetsov Wrote:Henryk, I hope you agree with Figure 2.
As long as you didnt have explained it I can not agree
Quote:Let us move to Figure 3. Please, run testfile of the fast plotter; tell me if the code for figure http://en.citizendium.org/wiki/Image:Con...xample.jpg runs well at your computer. You will need functions ado and conto for Figure 3.
If it works, try fig.3 http://en.citizendium.org/wiki/AnalyticT...seSqrt2v00.
Yes works. If I understand that right, you have a certain procedure that creates the contour plot from a mesh of function values (I guess by somehow interpolating the gaps), at least it takes not additional computation to approach the function argument while approach a certain value .
So then give me the next step of your Dmitriimakescontourplotoftetrationtutorial.
Btw. if you allow me a very little criticism, your code is in the complete spirit of assembler, as if the world hadnt changed since that time
Posts: 151
Threads: 9
Joined: Apr 2008
05/24/2008, 11:24 AM
(This post was last modified: 05/24/2008, 11:26 AM by Kouznetsov.)
bo198214 Wrote:Kouznetsov Wrote:How long does it take, to plot ? This is not in scale and took 1562 seconds. You see the difference is in the range of error. But I mean it was already the theoretic result, that it is periodic with so no need to wonder. Thanks, Henryk. I think, at least for , our tetrations coincide. I still wonder why do you direct the axis down (at the top it is and at the bottom ), but anyway, I believe, you have many correct decimal digits.
