Posts: 1,389
Threads: 90
Joined: Aug 2007
Ivars Wrote:Im (W) = + ipi/2
then branches k=1 and k=+1 are accordingly
i(pi/2  2pi) =  5/2pi i ; +i(pi/2+2pi) = + 5/2 pi*i and so on for all branches.
Again, no! Try for example Maple (LambertW) or Mathematica (ProductLog), you can chose the branch there, for example
Code: LambertW(3,Pi/2)=2.19834263013.98120831*I
LambertW(2,Pi/2)=1.6042909137.647192276*I
LambertW(1,Pi/2)=1.570796327*I
LambertW(0,Pi/2)=1.570796327*I
LambertW(1,Pi/2)=1.604290913+7.647192276*I
LambertW(2,Pi/2)=2.198342630+13.98120831*I
where the first argument denotes the branch.
The numbering of the branches is of course convention, but seems to match we the one given in your article (which seems to be a quite good article).
Posts: 366
Threads: 26
Joined: Oct 2007
Hej BO,
bo198214 Wrote:Again, no! Try for example Maple (LambertW) or Mathematica (ProductLog), you can chose the branch there, for example
Code: LambertW(3,Pi/2)=2.19834263013.98120831*I
LambertW(2,Pi/2)=1.6042909137.647192276*I
LambertW(1,Pi/2)=1.570796327*I
LambertW(0,Pi/2)=1.570796327*I
LambertW(1,Pi/2)=1.604290913+7.647192276*I
LambertW(2,Pi/2)=2.198342630+13.98120831*I
where the first argument denotes the branch.
I see, thanks. I appreciate a lot the lessons I get from You.
I wonder if there is analytical way to derive all branch values for W(pi/2) as function of k and hence h(e^pi/2). What does Mathematica says about the values of h(e^pi/2) and h(e^pi/2) along few first branches? (I have no access to such instruments...). Any kind of pattern?
From paper I have I see these formulas for Quadratix of Hippias but can not yet understand how these could be used to derive values of W(pi/2) on other branches than 0 and 1.
I still think there are actually 4 values h(e^pi/2) and may be even in some more general divergent cases of real number tetration: 2 corresponding to i, 2 to +i , but I do not know yet how to find out if that is true and what are these values. The only case when there are only 2 distinquishable values ar +i bacause the real parts here are 0..
I also make a conjecture that as number of branch k> infinity,
h(e^pi/2) = 1 independent of way it is reached.
Also, I think there must be some relation between all h(e^pi/2) and
h(e^pi/2) branch values, possibly type of Mobius transform. Again , just a conjecture, to be proved wrong to make progress
Best regards,
Ivars
Posts: 766
Threads: 119
Joined: Aug 2007
Ivars Wrote:But, if I understand correctly ( probably not) the picture 4. in the article http://www.cs.uwaterloo.ca/research/tr/1993/03/W.pdf if
nice coincidence. I found a formula in this paper, which agrees perfectly with my fixpointsforrealbases b>e^(1/e) formula. In that article they discuss boundaries for the lambertwfunction such that
x = eta ctg(eta) + i * eta
and similar (page 15, formula 4.1  4.5)
For the complex fixpoints for real b>e^(1/e) I had the same type of formula; such that
u = beta cos(beta)/sin(beta) + I * beta
t = exp(u)
b = exp(u/t) is real
and this last expression is a branchenabled version of
b = t^(1/t)
Nice...
Gottfried
Gottfried Helms, Kassel
Posts: 766
Threads: 119
Joined: Aug 2007
bo198214 Wrote:Gottfried Wrote:there is an article of L Euler, which seems to deal with it.
Where did you dig out this article?!
That was *not* complicated (as I erroneously recalled). In fact, the scan is in the Eulerarchive
E489
I even had the link in my Julythread in sci.math. (Where is my brain currently? )
Gottfried
Gottfried Helms, Kassel
Posts: 1,389
Threads: 90
Joined: Aug 2007
Gottfried Wrote:For the complex fixpoints for real b>e^(1/e) I had the same type of formula; such that
u = beta cos(beta)/sin(beta) + I * beta
t = exp(u)
b = exp(u/t) is real
and this last expression is a branchenabled version of
b = t^(1/t)
So how do you finally compute the th branch of or with this formula?
Posts: 366
Threads: 26
Joined: Oct 2007
Hej Gotfried,
Congratulations! There are no accidents.
Quote:So how do you finally compute the th branch of or with this formula?
Yes, how would You? And particularly, in case
h(e^pi/2) and h(e^pi/2)?
Waiting impatiently even
Ivars
Posts: 766
Threads: 119
Joined: Aug 2007
11/07/2007, 12:58 PM
(This post was last modified: 11/07/2007, 01:12 PM by Gottfried.)
Ivars Wrote:Hej Gotfried,
Congratulations! There are no accidents.
Quote:So how do you finally compute the th branch of or with this formula?
Yes, how would You? And particularly, in case
h(e^pi/2) and h(e^pi/2)?
Waiting impatiently even
Ivars
No chance.... ;)
Yes, there is the coincidence; but I did not compute the Wfunction but the function, which gives real bases b (or, to avoid confusion with the parameternotation in the article:bases s) for exp(u/t) where s=t^(1/t) is the principal branch, given u (or more precisely: given the imaginary part of u), and get real bases s>1 .
I set imag(u) = beta = any real value pi < beta < pi
compute real(u) according to the above formula thus having u completed,
then compute t = exp(u)
and then compute s = exp(u/t), which is then surely real.
The formula for this is in the file fixpoints.pdf
In this article I've not yet included the extension of the range for beta>pi; but I've done some computations with this and found further fixpoints for the real s in the regions 2*k*pi< beta < 2*(k+1)*pi. However, there is no exact periodicity, the consecutive fixpoints for the same s approach the lower bound 2*k*pi with the index k.
I can find the inverse, to compute a fixpoint t by a given s, only by numerical approximation, since s=f(u) is monotonic, using a binary iterative process.
If I *had* the branchenabled LambertWfunction, this would be easier, but Pari/GP doesn't have it and I still have only the pythonexample from wikipedia for the realvalued region, and have not yet invested in programming it myself.
Gottfried
Gottfried Helms, Kassel
Posts: 1,389
Threads: 90
Joined: Aug 2007
11/07/2007, 01:48 PM
(This post was last modified: 11/07/2007, 02:11 PM by bo198214.)
It is not that difficult to compute the branches of .
The branches of are simply the fixed points of . In this way you can compute the branches via
, where .
This is however valid only for as the numbering of the branches in this interval may be a bit different. For the branch 0 and 1 (which are nonreal) join and for slightly smaller it splits again into two real branches.
The negative branches are simply the conjugates of the positive branches: .
Edit:
As it is so easy to compute it is perhaps more appropriate to compute from by instead of computing from .
Posts: 366
Threads: 26
Joined: Oct 2007
hej BO,
PLEASE post at least one numerical example how to use this limit formula e.f for k=2, h(e^(pi/2)).
I am not familiar (entirely my fault) with the notations You use  what is n, how to take the limit, what is z, what is b (I assume b=e^(pi/2) in my case.
Thank You in advance,
Ivars
Posts: 1,389
Threads: 90
Joined: Aug 2007
11/07/2007, 10:26 PM
(This post was last modified: 11/07/2007, 10:35 PM by bo198214.)
Ivars Wrote:PLEASE post at least one numerical example how to use this limit formula e.f for k=2, h(e^(pi/2)).
I am not familiar (entirely my fault) with the notations You use  what is n, how to take the limit, what is z, what is b (I assume b=e^(pi/2) in my case.
Yes the notation, mainly you have to know what means, it is simply the times repetition of applied to , for example .
In our example is then . Because we compute which means the complex conjugate of . To compute this we consider and then compute . This can of course only approximately computed. Have a look at some sample values:
But you can see that the value converges, hence .
This is indeed the same value, you get when computing
with Maple.
